MK Shoring System demonstrates its high load-bearing capacity in the construction of the Waste Conversion Plant in Pavia
ULMA provided comprehensive engineering support, cost reduction, and high levels of quality and safety in the construction of the A2A Waste-to-Energy Plant project in Pavia, Italy.
Climbing Solutions, a high-rise product line that focuses on safety and productivity
ULMA's COMPLETE CLIMBING SOLUTIONS is an integral package that provides forming, climbing, and safety in a single product line. We offer an integrated solution that adapts to any height and geometry, is cost-effective, and increases on-site productivity.
Renovation of Guadiana International Bridge
The International Bridge over the Guadiana River joins Spain and Portugal, spanning between the towns of Ayamonte and Vila Real de Santo António. The composite bridge was designed by the engineer José Luis Cancio Martins, with a length of 666 metres, divided into five spans. Since its original construction in 1991 it has become a symbol of the union between the two countries that compose the Iberian Peninsula.
Engineering Solutions for a Large-Scale Project
The D4R7-Bratislava project in Slovakia includes the construction of 27 km of the D4 Motorway and 32 km of the R7 Expressway, as well as 14 intersections, and more than 100 bridges, including the sizeable Danube Bridge, with a surface area of over 100,000 square metres. It represents the largest public-private partnership (PPP) in the history of Slovakia.
185 Broadway Rising Above The Financial District in New York
Rising above the city's financial heart, the tower will offer magnificent views of the skyscrapers. Residents and visitors will have a wide array of dining, entertainment, and fitness options available.
CVS Cantilever Form Carrier, the Solution for Complex Terrain
The new ES-60 Viaduct, which forms part of the Slupsk - Gdansk portion of the S6 Expressway in Poland, will considerably reduce travel time between these two cities and thus reduce the flow of traffic on local roads.
Pre-assembled solutions at the Tampa International Airport, USA
The extension of the Tampa International Airport required forming and shoring solutions to build a new bridge for Taxiway ‘A’, ULMA is collaborating to build it.
ULMA demonstrates its experience and engineering expertise on the BR-280 SC Highway, in Brazil
The BR-280 is a federal highway in the state of Santa Catarina, which stretches from the city of São Francisco do Sul to Dionísio Cerqueira, near the Argentine border, with a total length of approximately 634.1 km.
BATEK, the new one sided tying formwork system for walls
ULMA is launching BATEK, the one sided tying formwork system for walls. Reduction of labour and assembly time are the defining features of this highly efficient panel formwork system.
Shaped geometries in the centre of London
Battersea Power Station is one of the most ambitious projects to be undertaken in the centre of London. The complex will comprise a spacious shopping centre, luxury residences, offices, recreational areas, and green spaces
New STRIPPING CORNER MAX Is Now Available
The ideal solution for fast and efficient stripping formwork in interior spaces.
ULMA Launches a New Digital Service Pack for Scaffolding
Scaffmax®, a powerful scaffolding configurator, joins ULMA Studio for Revit®, complete with a new library including BRIO Modular Scaffolding and DORPA Frame Scaffolding, as part of ULMA’s digital toolkit available at a single click.
High performance and safety at the Wesley Tower, Mississauga, Canada
Wesley Tower, is a vital part of the Daniels-City Center iconic 93.000 m2 multi-award winning master-planned community. Located at Confederation Parkway and City Centre Drive, this new residential tower will be nestled within a destination neighbourhood conveniently located in the heart of the Mississauga City Centre, Ontario.
Caleido, the Latest Addition to Madrid’s Skyline
Caleido will join Madrid’s skyline as the fifth skyscraper in the 'Cuatro Torres Business Area'.
Construction of Poland’s longest road tunnel with the MK Formwork Carriage
The S7 Expressway crosses Poland from Lubień to Rabka Zdrój, north to south, passing through the Voividato Malopolskie region. There are three separate sections currently under construction. One of these sections goes through Luboń Maly mountain, for which a tunnel with two separate tubes is being built, with a total length of over 4 km.
Elegance and high-end design mixed in a residential tower in Midtown, NYC
611 West 56th St. is a 134.000 m² modern residential tower with 37 stories located in the heart of New York City.
Innovative ULMA solutions in the construction of the Galeazzi Hospital, Italy
The new hospital structure, designed according the most innovative standards in sustainability and functionality, combines the IRCC Galeazzi Orthopaedic Institute and the Sant’Ambrogio Clinic Institute, which together constitute the San Donato Hospital Group.
ULMA engineering solutions on the emblematic Arch of Innovation bridge, Brazil
The arch of innovation is a cable-stayed bridge that will connect Zarur, São João, and Cassiano Ricardo avenues in São Paulo, Brazil. With a height of 100 m, it has become one of the most iconic bridges in the country of its type, given its peculiar arc shape.
Array of solutions for the Toquepala mine in Peru
The expansion of the Toquepala Mine (Tacna), operated by Southern Copper Corporation, will allow it to increase copper production by 69%, reaching up to 245,000 tonnes annually. This represents a strategic investment project for the growth of the mining industry.
Skyliner, the new tower that lights up the night in Warsaw
Being built in the center of Warsaw, the office building will reach a height of 195 m and will be one of the tallest buildings in the capital. The building will consist of 45 storeys, of which 30 will be for offices, 4 for commercial and service premises, 4 for technical rooms, and two for spacious Skybar, from which you can admire the panorama of Warsaw. In addition, a 5-level underground car park is under costruction.
ULMA formwork, shoring, and scaffolding solutions for Morumbi Station in São Paulo, Brazil
Morumbi station, located in southern São Paulo, is part of Line 17 - Oro that will connect the Congonhas Airport to the Morumbi District of São Paulo. Led by the developers Camargo Corrêa Infra, this large urban transportation project will increase economic productivity and contribute to improving the quality of life for local residents, serving close to 41,000 passengers daily.
ULMA Strengthens its Environmental Commitment with FSC and PEFC Certifications
By obtaining the Forest Stewardship Council (FSC) and Programme for the Endorsement of Forest Certification (PEFC) certifications over the past two years, ULMA is doing its part to guarantee responsible forest management practices, thus protecting biodiversity and numerous ecosystems.
Productivity and safety at the 800 Harbor Boulevard building in New Jersey
Located at the southern end of Weehawken's Lincoln Harbor, the 800 Harbor Boulevard residential building has been designed by Marchetto Higgins Stieve Architects, recently named by the American Institute of Architects of New Jersey as "Signature of the Year 2019".
ULMA Studio for Revit® Now Available
ULMA is unveiling its new space “BIM BANG,” where you can download ULMA Studio, the new add-In for Revit® Autodesk®, for free.
Productivity through the development and implementation of BIM Methodology
BIM Methodology responds to the need for a cultural and relational shift in the construction industry, which implies the integration of all participating parties in a single planning process for each project, from start to finish.
Safe and efficient engineering solutions for the Mina Justa Mine construction project in Peru
The copper deposit in Mina Justa, Peru, is considered to be one of the largest of its kind in the world, with an estimated value of $1.6 billion. It will produce 102,000 metric tonnes of copper concentrate and 58,000 metric tonnes of copper cathode annually.
The building of 130 William Tower will redefine the Lower Manhattan skyline
130 William is a luxury residential high-rise tower, located in the middle of the Financial District of Manhattan and designed by the British-Ghanaian architect Sir David Adjaye, internationally renowned as one of contemporary architecture’s most inventive leaders.
ULMA is collaborating in the construction of the Real Plaza de Puruchuco Shopping Centre, one of the largest shopping centres in Peru
Covering approximately 230,000 square metres, the Real Plaza Puruchuco project has required specialised and innovative construction techniques, relying on ULMA’s technical and logistical support throughout the entire process.
High performance and safety for Hanza Tower, Poland
The Hanza Tower, located in the centre of Szczezin, Poland, will be one of the tallest buildings in the area drawn between the cities of Berlin, Gdansk, Gdynia, and Sopot.
The modular nature of ULMA formworks key in the Antzuola viaduct
The Antzuola Viaduct is one of the many structures that make up the high-speed train corridor in Basque Country, Spain. The complexity of the project, due to mountainous terrain combined with tight deadlines, required technologically advanced products, response capacity, and material provisioning in strict accordance with the client’s demands.