Adjustable modular circular formwork for the construction of curved walls. Optimised for energy sector constructions, such as water tanks, gas tanks, etc.
This is a high-strength durable circular formwork, with fast curving system and excellent concrete finishes.
- Basic components of the BIRAMAX formwork system: outside panel, inside panel and clamp.
- Maximum pressure: 60 kN/m2 (line 6, tab. DIN 18202)
- Minimum curve radius: 2 m
- Models with varied panel height: 3 m; 2 m; 1.5 m
- Models with varied panel width:
- Exterior panel: 2.25 m and 1.125 m
- Interior panel: 2.2 m and 1.1 m
- Guaranteed safety in the assembly and concrete pouring phases by means of different safety platforms.
- Durable, robust panels made of galvanized steel
- Reusable plywood is easy to maintain and repair
- Adjustable:
- Easy curving system with only 4 adjustment points
- Simple placement of compensation plates between panels
- Efficient:
- Excellent concrete finish thanks to the plastic-coated plywood panels
- Only 2 anchors at height
- The same elements are used for vertical and horizontal joints
- A wide range of panels for all circumferences and heights. Interior and exterior panels are differentiated by colour
- Assemblies are easy to handle with different lifting systems
- Compatible with ULMA´s ORMA modular formwork
The new lock will allow river navigation between Cremona and Piacenza, after a period in which decreased water flow has made travel impracticable.
This was a comprehensive project requiring many distinct solutions, the most spectacular of which was the shoring for the upper ring, set at a height of 40 m with a circumference of 400 m.
The Kozienice power plant, working since 1972, is the second largest coal power station of Poland and the first one with regard to productive capacity.
Highly flexible crane-lifted climbing system, adaptable to inclined and curved walls. Minimum transport volume.
Crane-lifted climbing system optimised for large formwork gangs. Highlights: large working platforms and easy handling.
A simple solution for supporting shaft internal formwork. Perfect for elevator and staircase shafts, hollow piers etc.
Crane-lifted climbing system, perfect for the construction of double-sided walls and piers.
A wide range of push-pull props to align and support wall panel gangs.